HIKVISION DS-PHA20-P User Manual

Telephone Line Cut O Detecon
If the opon is enabled, an system status event nocaon will be uploaded when telehphone
is disconnected.
RS-485
Excepon Detecon
If the opon is enabled, an system status event nocaon will be uploaded when the RS-485
bus of device has excepon.
AC Power Down Check Time
The system checks the fault
aer the congured me duraon aer AC power down.
To compliant the EN 50131-3, the check me duraon should be 10 s.
Enrollment Method
Steps
1. Click Conguraon → System → System Opons → Adding Through to enter the enrollment
method page.
Figure 4-36 Enrollment Method
2. Click Enter the Enrollment Mode.
3. In the pop-up window, Select a RS-485 wireless receiver.
4. Select the wireless device type.
5. Click OK to
nish the enrollment sengs.
Time
Sengs
You can set the device me zone, synchronize device me, and set the DST me. The device
supports
me synchronizaon via Hik-Connect server.
In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
Hybrid Security Control Panel User Manual
57

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English