HIKVISION DS-PHA20-P User Manual

Figure 4-25 Public Area Sengs
3. Check the checkbox to enable the public area funcon.
Note
the default public area is area 1
4. Select area(s) to link to the public area in the list.
Note
It is required to select at least an area to link to the public parion.
5. Click Save to set the area as public area.
Schedule and Timer
Sengs
You can set the Entry Delay 1 & Entry Delay 2 me duraon for the delayed zone type and the Exit
Delay delayed
me to exit the zone. You can also set the alarm schedule. The zone will be armed/
disarmed according to the congured me schedule.
Steps
1. In the client soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → Area Management → Schedule & Timer to enter the Schedule & Timer
page.
Hybrid Security Control Panel User Manual
40

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English