HIKVISION DS-PHA20-P User Manual

6.
Oponal: Change the authencaon password.
Note
• By default, the
authencaon password is displayed in the text box.
• The authencaon password should contain 6 to 12 leers or digits. For security reasons, an
8-character password is suggested, which containing two or more of the following character
types: uppercases, lowercases, and digits.
7. Click Save.
ISUP
In this secon, you can create an ISUP account, and edit the IP address/domain name, port
number.
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → Communicaon Parameters → ISUP Registraon to enter the page.
Figure 4-15 ISUP Registraon
3. Slide the slider to enable ISUP protocol.
4. Select the Address Type as IP or Domain Name.
5. Enter IP address or domain name according to the address type.
Hybrid Security Control Panel User Manual
27

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English