Network Traffic Camera • User Manual
14
Figure 3-3 Picture List
Table 3-2 Description of Picture List Parameters
The time of capturing the picture with millisecond
precision. For example, 20150915111054738 means
the picture is captured at 11:10:54:738, on September
15
th
, in 2015.
The lane where the vehicle is captured.
The color of the captured license plate.
The license plate number of the vehicle.
The speed of the captured vehicle.
The captured type, normal, over speed, wrong
direction are selectable.
The vechile counting No. ranging from 1 to 65535. It
will overwrite if it reachs the max. value.
The file path of the saved picture.
Continuous Capture: Click Continuous Capture to capture pictures continuously, and click “ ”
to set continuous capture parameters including Lane No., Waiting Time, Capture Times, and
Continuous Capture Interval.
Figure 3-4 Set Continuous Capture Parameters
Lane No.: The lane where the vehicle is captured.
Waiting Time: Delay time from capture order had been delivered to vehicle was actual
captured.
To Next Page
Loading...
Need help?
General
