HIKVISION iDS-TCV300-A6I User Manual

Network Traffic Camera • User Manual
80
Chapter 12 Exception
Purpose:
The exception type can be HDD error, network disconnected, IP address conflicted, and vehicle
detector exception.
Step 1 Go to Configuration > Device Configuration> Exception.
Step 2 Select the exception type and the corresponding trigger methods.
Figure 12-1 Exception Settings
 Notify Surveillance Center: Send an exception or alarm signal to remote management
software when an event occurs.
 Trigger Alarm Output: Trigger one or more external alarm outputs when an event occurs.
 Alarm Dwell Time(s): The waiting time for the alarm triggered. And you can set the alarm
dwell time from 0 to 180s.
Step 3 Click Save to save the settings.

HIKVISION iDS-TCV300-A6I Specifications

General

Brand	HIKVISION
Model	iDS-TCV300-A6I
Category	Security Camera
Language	English