HIKVISION iDS-TCV300-A6I User Manual

Network Traffic Camera • User Manual
44
Chapter 9 Capture Parameters Configuration
Purpose:
You can configure capture parameters before capturing, and edit capture parameters when the
default capture parameters cannot meet actual needs.
9.1 Configure License Plate Parameters
This series of camera supports license plate recognition.
Step 1 Go to Configuration > Device Configuration > Capture Parameters > License Parameters.
Figure 9-1 License Parameters Configuration
Step 2 Select License Plate Recognition as Front Plate or Back Plate. You should select Front Plate
when you want to capture license plate number in vehicle head, and select Back Plate when
you want to capture license plate number in vehicle tail.
9.2 Configure Flash Light Parameters
Step 1 Go to Configuration > Device Configuration > Capture Parameters > Flash Light Parameters.
Step 2 Select a tab corresponded with the flash light control port.

HIKVISION iDS-TCV300-A6I Specifications

General

Brand	HIKVISION
Model	iDS-TCV300-A6I
Category	Security Camera
Language	English