Network Traffic Camera • User Manual
17
Chapter 5 Local Configuration
Purpose:
The local configuration refers to the parameters of the live view, record files and captured pictures.
The record files and captured pictures are the ones you record and capture using the web browser
and thus the saving paths of them are on the PC running the browser.
Step 1 Go to Configuration > Local.
Step 2 Configure the following settings:
Live View Parameters: Set the protocol type and live view performance.
− Protocol: TCP and UDP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality,
yet the real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
− Live View Performance: Set the live view performance to Least Delay, Balanced, Best
Fluency.
− Rule Information: It refers to the rules on your local browser, select enable to display
the colored marks when the motion detection, face detection, or
intrusion detection is triggered. E.g., enabled as the rules are, and the face
detection is enabled as well, when a face is detected, it will be marked
with a green rectangle on the live view.
− Feature Information: Enable the function, feature information of the detected target is
dynamically displayed near the target in the live image.
The feature information of different functions is different. For example, ID
and waiting time for Queue Management, height for People Counting,
etc.
Feature Information is only available for certain camera models.
Figure 5-1 Live View Parameters
To Next Page
Loading...
Need help?
General
