Capture is triggered according to the level signal status. If you select Falling Edge, the device
will trigger capture at the moment that the high level falls to low level. If you select Rising
Edge, the device will trigger capture at the moment that the low level rises to high level.
Capture Interval
Select Time, and set Interval (the me between the adjacent captures).
Capture Pictures
The number of captured picture(s).
9.
Oponal: Link supplement light(s) to the specic lane(s). Refer to Set Supplement Light Linkage
for details.
10.
Oponal: Check the other external input channel(s) to copy the same sengs.
11.
Draw lane lines.
1) Click Draw Lane Line.
Note
The system will capture a picture and use it as the background. You can also check Video
Background to use the live view as the background.
2) Select the default lane line and right border line, and drag the two end points of the line or
drag the whole line to adjust its
posion according to the actual scene.
3) Click OK.
Network Trac Camera Conguraon Manual
3
To Next Page
Loading...
Need help?
General
