HIKVISION iDS-TCV907-BER Configuration Manual

Figure 1-30 Set Trac Light Synchronizaon
3.
Set Phase Posion and Signal Frequency according to the actual needs.
4.
Click Save.
1.9.8 Set Vehicle Feature Parameters
Set vehicle feature parameters if you need to detect the vehicle features of the passing vehicle.
Steps
Note
The parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Vehicle Feature → Vehicle Feature .
Figure 1-31 Set Vehicle Feature Parameters
2.
Check the vehicle features that needed to be detected, and set the corresponding parameters.
Non-Motor Vehicle User Wearing Helmet
Detecon
Set Helmet Detecon Sensivity. It will capture when the amount of people who are not
wearing helmets reaches the set value. If there are 2 or above people in the vehicle, it will
not capture when the amount of people who are not wearing helmets is less than the set
value. If there is only one person in the vehicle and he/she is not wearing a helmet, it will
capture.
3.
Select Steering Wheel
Locaon according to the actual condion.
4.
Click Save.
Network Trac Camera Conguraon Manual
57

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English