HIKVISION iDS-TCV907-BER Configuration Manual

1.9.5 Set Informaon Overlay
Set Single Picture Overlay
If you want to overlay informaon on the captured single pictures, set capture overlay.
Steps
Note
The supported parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Capture Parameters → Text Overlay .
2.
Select single picture channel.
3.
Check Capture Picture Overlay.
Figure 1-24 Set Single Picture Overlay
4.
Set the percentage, front size, color, overlay posion, etc.
Percentage
It is the percentage that the overlaid informaon occupies on the picture. For example, if you
set the percentage to 50, the overlaid informaon in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Transparency
It is the
condion of viewing the live view image through the overlaid informaon.
Overlay Number Zeroizing
Network Trac Camera Conguraon Manual
49

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English