HIKVISION iDS-TCV907-BER Configuration Manual

Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Go to Conguraon → Event → Alarm Linkage → Linked Capture .
2.
Check Enable.
Figure 1-33 Set Linked Capture
3.
Check Linkage Type.
Note
The supported linkage types vary with dierent violaon types. The actual device prevails.
4.
Set Linked Camera parameters.
5.
Click Save.
1.10 Set Barrier Gate Linkage
If a barrier gate has been connected to the device, you can link barrier gate to realize the control
and management of the vehicles at the entrance or exit.
Note
Only the device supporng license plate recognion system supports barrier gate linkage. The
actual device prevails.
Network Trac Camera Conguraon Manual
59

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English