HIKVISION iDS-TCV907-BER Configuration Manual

Figure 1-2 Draw Lane Line
12.
Click Save.
1.1.2 Set RS-485 Radar
Set RS-485 radar if RS-485 signal (speed detecon or capture via radar) is connected, and capture is
triggered by radar. In this mode, the informaon including the vehicle speed, vehicle passing me,
vehicle overview, license plate number, license plate color, vehicle color, the facial features of the
driver and the front passenger, etc. will be recorded.
Before You Start
●
Install the radar.
●
Connect the D+ and D- of the radar RS-485 interface to the D+ and D- of the device RS-485
interface.
Network Trac Camera Conguraon Manual
4

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English