HIKVISION iDS-TCV907-BER Configuration Manual

1.9.9 Set Image Encoding Parameters
If the captured pictures are not clear, set the resoluon of the captured pictures and the picture
size.
Steps
1.
Go to
Conguraon → Capture → Capture Parameters → Image Encoding and Composion →
Image Encoding .
Figure 1-32 Set Image Encoding Parameters
2.
Select Capture Resoluon.
3.
Select Close-up Picture
Resoluon.
4.
Enter the picture size.
JPEG Picture Size
The size of the compressed captured picture. The actual size is related to the scene
complexity.
Composite Picture Size
The size of the compressed composite picture. The actual size is related to the scene
complexity.
Note
Only the device supporng picture composion supports composite picture size sengs. The
actual device prevails.
Picture EXIF Format Transmission
The captured pictures will be transmied in the EXIF format.
5.
Click Save.
1.9.10 Set Linked Capture
The device supports to run the linked camera to capture from
dierent angles.
Before You Start
Select applicaon mode and check violaon detecon types.
Network Trac Camera Conguraon Manual
58

HIKVISION iDS-TCV907-BER Specifications

General

Brand	HIKVISION
Model	iDS-TCV907-BER
Category	Security Camera
Language	English