OPERATING THE MACHINE
5-26
ATTACHMENT
Allowable Weight Limits of Installed Attachment
•
When an attachment other than the standard bucket is
installed on the machine, the machine stability will be dif-
ferent. If a heavy attachment is used, not only will controlla-
bility be affected but also machine stability will be reduced,
possibly causing safety hazard.
•
Before installing attachments such as hydraulic breaker,
crusher (concrete crusher), or pulverizer, take machine con-
trollability into account when selecting the weight of the
attachment by referring to the table below.
Unit: kg (lb)
Specification
Base Machine Breaker Crusher/Pulverizer
Model Arm Std. Weight Max. Weight Std. Weight Max. Weight
Standard Type
ZX110-3 Std. 1000 (2200) 1100 (2420) 1200 (2640) 1400 (3080)
ZX110M-3 Std. 1250 (2750) 1400 (3080) 1500 (3300) 1750 (3850)
ZX130-3, 130LCN-3 Std. 1000 (2200) 1150 (2530) 1250 (2750) 1450 (3190)
ZX160LC-3 Std. 1250 (2750) 1350 (2970) 1500 (3300) 1750 (3850)
ZX180LC-3 Std. 1400 (3080) 1550 (3410) 1700 (3740) 2000 (4400)
ZX180LCN-3 Std. 1300 (2860) 1450 (3190) 1600 (3520) 1850 (4070)
ZX210-3, 210LCN-3,
240N-3
Std. 1550 (3410) 1750 (3850) 1900 (4180) 2200 (4840)
ZX210LC-3 Std. 1750 (3850) 1950 (4290) 2100 (4620) 2450 (5390)
ZX250LCN-3 Std. 1950 (4290) 2150 (4730) 2350 (5170) 2700 (5940)
ZX250LC-3 Std. 2150 (4730) 2400 (5280) 2600 (5720) 3050 (6710)
ZX280LCN-3 Std. 2350 (5170) 2600 (5720) 2850 (6270) 3300 (7260)
ZX280LC-3 Std. 2400 (5280) 2650 (5830) 2900 (6380) 3400 (7480)
ZX350LCN-3 Std. 2600 (5720) 2850 (6270) 3100 (6820) 3600 (7920)
ZX350LC-3 Std. 2650 (5830) 2900 (6380) 3150 (6930) 3700 (8140)
To Next Page
Loading...
Need help?
General
