EasyManuals Logo

HOLDEN CG Captiva 2007 User Manual

HOLDEN CG Captiva 2007
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
6-5
Chapter 6
EMERGENCIES
WARNING
Use the jack only for lifting the vehicle when changing wheels and lifting the
spare wheel carrier.
Do not jack a vehicle with a trailer attached. Remove the trailer rst.
Do not get under a vehicle supported only by a jack, use vehicle support stands.
Do not start or run the engine while the vehicle is only supported by the jack.
All passengers should be out of the vehicle when it is being jacked.
Use the jack only at the designated lifting points and spare wheel carrier.
Use in other locations may result in the vehicle falling of the jack, or damage
to the vehicle.
The vehicle should only be jacked on hard, level surfaces.
Changing a at tyre
Park on level surface, ensure the wheels are pointing straight ahead and set the
park brake rmly.
Remove the ignition key (to lock the steering) and place the transmission shift lever
in the P (park) position (automatic) or rst or reverse gear (manual).
The jack and tools are secured in the luggage storage compartment.
1.
Open the tailgate.
2. To access the jack and tools lift up on
the compartment handle and fold the
lid upward.
3.
Remove the wing bolt from the jack by
turning it anticlockwise.
4.
Remove the jack and the wheel wrench.
5. Remove the straps holding the bag
which contains the wheel wrench
and remove the wheel wrench from
the bag.
FLAT TYRE
C100_6042
C100_6003
CAPTIVA BOOK.indb 5 30/05/2007 12:49:37 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN CG Captiva 2007 and is the answer not in the manual?

HOLDEN CG Captiva 2007 Specifications

General IconGeneral
BrandHOLDEN
ModelCG Captiva 2007
CategoryAutomobile
LanguageEnglish

Related product manuals