6-17
Chapter 6
EMERGENCIES
Shift lock control system
(automatic transmission)
Your vehicle has a Brake-Transmission
Shift Interlock (BTSI) system. Before
shifting from P (park), the ignition must be
in the ON position and the brake pedal
must be applied.
If the system does not respond to the
above procedure and the shift lever
can not be moved, use the following
procedure:
1.
Switch off the ignition and remove
the key.
2.
Apply and hold the brake pedal.
3. Remove the cap from the transmission shift lock slot.
4. Insert and press the ignition key into the transmission shift lock slot.
5. Shift the gear lever to
N (neutral).
6.
Remove the key from the slot.
7. Start the engine and shift the transmission into the desired position.
8. Reinstall the cap.
9. Refer to your Holden Dealer as soon as possible.
Note
•
If the shift lever is returned to the P (park) position, the above procedure will need
to be repeated to shift the lever into N (neutral).
•
The above procedure will need to be carried out if the vehicle has a at battery and
requires towing.
•
Refer to Towing your disabled vehicle previously in this chapter.
TRANSMISSION SHIFT LOCK CONTROL SYSTEM
3
CAPTIVA BOOK.indb 17 30/05/2007 12:49:46 PM
To Next Page
Loading...
Need help?
General
