Improperly operating in reverse could cause you
to hit an obstacle or person behind you,
resulting in serious injury.
Make sure there are no obstacles or people
behind you before selecting reverse gear. When
it is safe to proceed, go slowly.
109
Basic Operation & Riding
Riding in Reverse
If the shif t lever is moved while the vehicle is moving, the sub-
transmission may be damaged.
(cont’d)
If you need to ride in reverse, make sure the area behind you is clear and
only operate the ATV at low speed.
Bring the vehicle to a complete stop, then make sure the transmission
is in neutral.
Depress and hold down the brake pedal.
Be sure there are no obstacles or people in the way.
Release the rear brake pedal.
Open the throttle gradually and ride slowly. Do not open the throttle
suddenly or make abrupt turns.
While pushing the release button, shift the shift lever into ‘‘R’’
(Reverse) gear.
If the vehicle won’t shift easily into reverse, rock the vehicle slightly
while moving the lever toward the reverse position. This will help line
up the gears in the sub-transmission.
1.
2.
3.
4.
5.
6.
05/06/08 11:01:36 31HN2650_118
To Next Page
Loading...
Need help?
General
