179
Suspension Adjustment
Servicing Your Honda
Suspension
(TRX500FGA Canada only)
Your front and rear suspension systems use springs and hydraulic
damping devices that suspend your weight and most of the weight of
your ATV.
The spring pre-loads for your front and rear suspension systems adjust
the amount of force required to begin compression of the spring.
The oil damper systems hydraulically control the natural compression
and rebound of the suspension springs so that traction and comfort are
maintained as the wheels ride over road surfaces.
The way you ride your ATV and the type of ride you want to experience
can also influence your suspension needs.
Lower spring pre-load provides a softer ride and is usually preferred for
light loads and smooth roads. Higher spring pre-load provides a firmer
ride and is recommended for heavy loads, rough road conditions, and
faster, more challenging riding.
Consider adjusting your suspensions pre-load whenever you change
your normal load, by adding or subtracting cargo accessories, or when
the road or riding conditions change.
The suspensions can be adjusted for rider weight and riding conditions
by changing the spring pre-load.
Do not attempt to disassemble, service, or dispose of the damper; see
your Honda dealer. The instructions found in this owner’s manual are
limited to adjustments of the shock assembly only.
05/06/08 11:12:30 31HN2650_188
To Next Page
Loading...
Need help?
General
