(2)
(3)
(1)
(3) minute select button
(1) adjust button
(2) hour select button
26
Digital Clock
Indicators & Displays
Instruments & Controls
Shows hour and minute while the ignition is ON ( ).
To zero the minute display, press and hold both the hour and minute
select buttons simultaneously for 2 seconds.
To advance the minute display one unit at a time, press and release the
minute select button ( ).
To advance the minute display automatically, press and hold the
minute select button. After 2 seconds, the minute display will begin
advancing. Release the button when the display reaches the desired
minute.
Turn the ignition switch ON ( ).
To adjust the time, proceed as follows for :
To put the clock in the adjust mode with the hour and minute display
flashing, press and hold the adjust button ( ) for more than 2 seconds.
To advance the hour display one unit at a time, press and release the
hour select button ( ).
To advance the hour display automatically, press and hold the hour
select button. After 2 seconds, the hour display will begin advancing.
Release the button when the display reaches the desired hour.
Press and hold the adjust button for more than 2 seconds when the
display reaches the desired minute. The display will stop flashing.
1.
2.
3.
4.
5.
6.
3
TRX500FA
2
1
05/06/08 10:49:08 31HN2650_035
To Next Page
Loading...
Need help?
General
