(1)
(4)
(2)
(3)
(1) waypoint number
(2) plus button
(3) minus button
(4) WP button
(5) waypoint distance
(5)
65
Basic Waypoint Selection
GPScape System
GPS Mode
To Mark Your Present Position:
There are two methods for marking waypoints.
Basic (to select your current position)
Advanced (to input desired destinations)
Turn the ignition switch ON ( ).
To select a higher waypoint number ( ), press and release the plus
button ( ).
To select a lower waypoint number, press and release the minus
button ( ).
To fast scroll, press and hold the plus or minus button until the
desired waypoint number appears.
(cont’d)
Use the GPS button to select the GPS mode.
Press and hold the WP button ( ) for about 2 seconds, until the
waypoint number and distance ( ) flash. Then release the button.
1
1.
2.
3.
4.
2
3
4
5
05/06/08 10:54:31 31HN2650_074
To Next Page
Loading...
Need help?
General
