Excel 800 LION
45 EN1B-0375GE51 R0308
Analog Output Modules
Types of Analog Output Modules, Terminal Socket
Type Description Housing
CLIOP822A Panel Bus analog
output module
Light gray
CLIOPR822A
Panel Bus analog
output module with
manual overrides
Light gray
CLIOL822A L
ON
W
ORKS
Bus analog
output module
Dark gray
CLIOLR822A
L
ON
W
ORKS
Bus analog
output module with
manual overrides
Dark gray
XS821-22 Terminal socket Light gray
Table 45 Excel 800 LION analog output modules
Features
• 8 analog outputs;
can also be configured per output as binary outputs
(0 … 10 V, 2 … 10 V, ON/OFF, or floating)
• Corresponding output status LEDs (red)
• …R822: 8 manual overrides, see figure below
Fig. 64 CLIOP822A Analog Output Module with terminal
socket
Legend
1 Service button S1
2 Hex switch S2
3 Manual overrides
4 Output LEDs
5 Service LED
6 Power LED
Functionality of service LED and power LED: see Table 74
to Table 76 on page 72 and following.
In the event of communication problems, the analog outputs
will move to the safety positions you have configured in
CARE, see analog output point description in the CARE –
User Guide, 74-5587/EN2B-0182GE51.
Terminals
Fig. 65 Terminal assignment and internal connections of
the analog output modules
Ter-
minal
Signal COMMENT
71, 75
COM a
2-wire communication bus
(LON/Panel Bus)
72, 76
COM b
2-wire communication bus
(LON/Panel Bus)
73, 77
24 V~ Power supply
74, 78
24 V~0 Power supply
1…8 AO1…AO8
Analog outputs 1…8
9…18
GND
Ground. All grounds are connected
internally to each other
21, 22
N.C. Do not use!
25, 26
Shield connection (functional earth),
internally connected to the DIN rail
Table 46 Description of the analog output module terminals
Notes
• Shield connection to be used for shielded I/O cables only.
It is not allowed to connect a L
ON
W
ORKS
shield, since
L
ON
W
ORKS
requires a resistor and a capacitor.
• If additional shield terminals are needed, the
XS814 Auxiliary Terminal Package can be installed.
To Next Page
Loading...
Need help?
General
