Honeywell LYNX Touch Series User Manual

LYNX Touch Installation and Setup Guide
- 17 -
Mechanics of Programming
Security Menu Screens
System Status is displayed at the top of each screen. The time and date are displayed at the bottom of the
Home Screen. The Security Home Screen consists of two pages. The first page displays the system status
and eight selection “buttons” and “tabs”. The displayed pages and options may vary slightly depending upon
the devices and services that are installed in or connected to the system.
Selection Function
Zones Provides access to Zone information and options.
Automation Provides access to the Z-Wave Device and Home Automation Screen.
Arm Away Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Message Provides access to Message Center.
Phone Provides access to Speaker Phone mode. (if programmed)
Delay/Instant Used to toggle between exit delay and instant arming options (displayed on Home Screen pages).
More Advances system to second page of the Home Screen.
The second page also displays the system status and seven selection “buttons” and “tabs”.
Selection Function
System Provides information about system status
Tools Provides access to Installer and User Programming Menus (Master User Code required for access).
Arm Away Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Dashboard Used to return to the Dashboard Screen (displayed if connected to Total Connect Services)
Settings Provides access to various keypad functions (i.e.; Brightness, Contrast, Volume, Voice, Chime & Ringer).
Delay/Instant Used to toggle between exit delay and instant arming options (displayed on both Home Screen pages).
Back Returns system to first page of the Home Screen.
Installer Tools Menu
The Tools/Installer Menu provides access to the
Installer configurable features and displays six options.
Entering the Installer Code is required to access the
Installer Menu.
Note: For information regarding the Rules, Events and
Schedules programming screens, refer to the User
Manual.
Ready To Arm
5100-100-066-V0
Program
Events
Schedules
Test
Initiate
Download
Rules
Installer Menu Page
User Tools Menu
The User Menu provides access to the User configurable
features and displays eight options. Entering the
Master User Code is required to access the User Menu.
WiFi ConfigDate Time
Ready To Arm
Events
Back
Reminders
KeypadUsers
5100-100-006-V0
Slide Show
Test
User Menu Page

Honeywell LYNX Touch Series Specifications

General

Brand	Honeywell
Model	LYNX Touch Series
Category	Security System
Language	English