CHAPTER
2
INTRODUCTION
Talkman Devices and Headsets
Vocollect Talkman™ devices are wearable terminals used with Vocollect
headsets to enable voice-directed work. Operators listen to instructions from
these devices to perform tasks such as warehouse order picking and factory
floor inspection, and then speak simple phrases to enter data.
All Talkman devices leave the operator's hands free to inspect items, pick
products, drive vehicles, or repair defects.
A700x, A700, and A500 Series Devices
Vocollect Talkman™ devices are wearable appliances used with Vocollect
headsets to enable voice-directed work. Operators listen to instructions from
these devices to perform tasks such as warehouse order picking and factory
floor inspection, and then speak simple phrases to enter data. All Talkman
devices leave the operator's hands free to inspect items, pick products, drive
vehicles, or repair defects.
Device Features
A700/A700x and A500 series devices are rugged appliances designed for
industrial use. These devices attach to a customized belt or shoulder harness,
depending on device type, equipped with a specially designed clip.
The Talkman A500 Vehicle Mounted Terminal (VMT ) and A700 VMT are A500
and A700 series devices with battery adapters mounted to a warehouse vehicle,
such as a forklift. After the device is mounted, the battery adapter is placed in
the battery area of the device and connected to the vehicle's power source.
Speech Recognition Headsets
A Vocollect speech recognition headset with an attached microphone allows the
operator to hear the device's instructions or questions. The operator talks to the
device to request information and enters data by responding to the device's
prompts.
5 SRX3 User Guide - Preliminary
To Next Page
Loading...
Need help?
General
