Electrical Specifications
l Cells: The battery pack uses a single lithium ion cell.
l Nominal voltage = 3.6V
l Watt hours = 2.7 WHr
l Protection circuit characteristics: The pack contains a protection circuit that
prevents over and under voltage conditions on the cell and protects the
pack from damage as a result of a short circuit between the positive and
negative terminals of the battery.
l The battery pack contains custom electronics that provide performance,
temperature, and pack identification to the device. This information is made
available to voice management software.
l Battery Charging: The battery pack must be charged only in a Honeywell
designated charger.
Mechanical and Environmental Specifications
l Drop-test specifications: The battery meets the transient drop criteria.
o
24 drops at 6 feet (182.88 cm)
o
12 drops at 7 feet (213.36 cm)
l Environmental specifications: The battery functions properly in the following
conditions:
o
Temperature: -22 °F to 122 °F (-30 °C to 50 °C)
o
Humidity: 95% non-condensing
o
Rain/dust: IP54
Battery Notifications
The battery triggers two warnings based on remaining runtime:
Battery Condition Audio Warning
When battery voltage is low "Headset battery is getting low."
When battery voltage is critically low and about
to turn off
“Headset battery is getting low. Change headset
battery now.”
SRX3 User Guide - Preliminary 68
To Next Page
Loading...
Need help?
General
