Wearing an SRX2/SRX3 Wireless Headset
1. Put the headset on and adjust the ear pad to fit snugly over your ear.
2. Position the t-bar directly above, and as closely as possible to, your other
ear.
3. If installed, adjust the stability strap so it fits securely across the back of your
head.
4. Rotate the electronics module up or down to position the microphone near
your mouth.
5. Make final adjustments with the flexible boom so that the microphone is
positioned correctly. Position the microphone as close to your mouth as
possible, but outside of your breath stream. It should be facing your upper
lip, and not touching anything (for example, clothing, skin, or facial hair).
Installing the Stability Strap on the SRX2/SRX3
Wireless Headset
1. Hold the headset so that the earpad faces you and the electronics module
faces away.
2. Locate the knob on the inside of the headband near the earpad.
3. Hold the strap so that the end with the hole fits over the knob on the
headband, and press down firmly so the knob comes all the way up through
SRX3 User Guide - Preliminary 18
To Next Page
Loading...
Need help?
General
