l Sealed components to prevent corrosion.
l Padded, lightweight headbands for increased comfort and personalized fit.
l Single ear cups that pivot vertically and horizontally and can be worn on
either ear.
l Foam ear pads for quick and easy replacement.
l A rotating lever on the outside of the earpiece for moving the microphone
up and down without causing stress on the microphone boom.
l Repeatable microphone position; a groove catches the boom, placing it in
the proper position when the boom is swiveled down for operation.
Care and Use
The headsets and microphones used with the Honeywell Voice system are
delicate pieces of electronic equipment. Proper care will ensure that they work
well for a long time. See Care and Use of Headsets and Microphones for more
information.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Honeywell is under license. Other trademarks and trade names are those
of their respective owners.
SRX2 and SRX3 Industrial Use Headsets
The SRX2 and SRX3 share a similar design. The main differences are:
l eModule color: The SX2 eModule is blue and black. The SRX3 eModule is
black.
l Headband color: The SRX2 headband is black. The SRX3 headband is black
with a red accent on the outside of the ear cup.
l Voice software: The SRX2 and SRX3 may require different minimum voice
software versions. Refer to the Voice Software User Guide for details.
The SRX2 and SRX3 share most accessories.
l The SRX2 and the SRX3 headsets use the same battery.
NOTE
Older batteries may have a Vocollect logo while newer batteries have a
Honeywell logo. The batteries are interchangeable.
l The SRX battery charger charges both SRX2 and SRX3 batteries.
SRX3 User Guide - Preliminary 10
To Next Page
Loading...
Need help?
General
