31
Setting up an IRF fabric
You can use HP IRF technology to connect and virtualize HP 5920 and 5900 switches into a large virtual
switch called an "IRF fabric" for flattened network topology, and high availability, scalability, and
manageability.
To set up IRF links between HP 5920 and 5900 switches, use SFP+ ports, 1/10-GE Ethernet ports, or
QSFP+ ports.
IRF fabric setup flowchart
Figure 44 IRF fabric setup flowchart
To set up an IRF fabric:
Start
Plan IRF fabric setup
Install IRF member switches
Connect the grounding cable
and power cords
Power on the switches
Configure basic IRF settings
Connect the physical IRF ports
Slave switches reboot and the
IRF fabric is automatically
established
End
To Next Page
Loading...
Need help?
General
