HP 8510 User Manual

DETECTOR: NORMAL BW
Selects the precision 10 kHz IF path and detectors (Preset).
PULSE WIDTH
Sets the width of the pulse from the HP 8510 rear panel. PULSE OUTPUT connector.
Range: 0 6 res. perio ds to 40.88 ms; Preset 10  s.
DUTY CYCLE
For internal triggering, sets the maximum allowed duty cycle. Range: 0 to 100 percent. Preset
10 p ercent.
PULSE OUT: HIGH
Selects the p olarity of the TTL Pulse Output to High for the On p erio d of the pulse (Preset).
PULSE OUT: LOW
Selects the p olarity of the TTL Pulse Output to Low for the On p erio d of the pulse.
T
rigger
Mo
de
Men
u.
The
new
T
rigger
Mo
de
men
u
is
reac
hed
b
y pressing
STIMULUS,
MORE,
TRIGGER
MODE.
TRIGGER
DELAY
Activ
e
only
in the
F
requency
domain,
used
to
set
the
dela
y
b
et
w
een
the
in
ternal
or
external
measuremen
t
trigger
and
the
actual
measuremen
t.
Range:
0
s
to
40.88
ms;
Preset
5

s.
TRIG
MODE:
INTERNAL
Selects
the
in
ternal
measuremen
t
trigger
(Preset).
TRIG
MODE:
EXTERNAL
Selects
the
falling
edge of
the TTL
signal input
at the
HP
8510
rear
panel
TRIGGER
IN
as
the measurement trigger.
Reference
Data
11-3

HP 8510 Specifications

General

Brand	HP
Model	8510
Category	Measuring Instruments
Language	English