|5 24802996 Nov/11/2007 15:11:42 M cfa0:/main.bin |
======================================================================
Displaying all files at the CLI
<HP>dir
Directory of cfa0:/
0 drw- - Nov 28 2000 04:09:30 logfile
1 -rw- 24802996 Nov 04 2007 17:03:26 main_bak.bin
2 -rw- 1355 Nov 04 2007 17:22:12 startup.cfg
3 -rw- 24802996 Nov 13 2037 13:21:20 main.bin
505480 KB total (456576 KB free)
File system type of cfa0: FAT32
Table 6-14 Description on the display information of the dir command
Display information Description
Directory of cfa0:/ Name of the current directory
505480 KB total (456576 KB free) Used space of the CF card (available space)
File system type of cfa0: FAT32 File system type of the CF card
For details about the dir command, refer to File System Management in the System Volume of
HP SR6600 Routers User Manual.
Setting Application Files Attributes
Setting application file attributes on the BootWare menu
You can modify the attributes of the main, backup, and N/A application files on the BootWare
menu or using commands after the application files boot; however, you cannot modify the
attribute of the secure application file. For details about application file attributes, refer to
“Application Files” on page 6-1.
Select 2 on the file control sub-menu, and the system displays:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
======================================================================
|NO. Size(B) Time Type Name |
|1 24802996 Nov/04/2007 17:03:26 B cfa0:/main.bin |
|2 24802996 Nov/11/2007 15:11:42 M cfa0:/main_bak.bin |
|0 Exit |
======================================================================
Enter file no:
Enter the file number, select 1, and the system prompts:
Modify the file attribute:
======================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
To Next Page
Loading...
Need help?
General
