Action
• Mount the volume with a drive letter and verify it with the chkdsk /v /f
command or wait until the system is completely restored and then recreate the
original mount point.
• Manually reboot the system directly to MiniOS (do not reboot from the recovery
CD). The previously unmounted volume will be automatically mounted to a drive
letter.
Problem
On a Windows Vista or Windows Server 2008 system, the network is not available
due to missing network drivers
During a disaster recovery, the network is not available because the DR OS does
not support the network card.
Action
Inject the missing drivers into the DR OS image. See “Preparing DR ISO
image” on page 64 (EADR) or “OBDR backup” on page 75 (OBDR).
Problem
Creating an ISO image fails with the message “Unsupported version of drecovery.ini”
When creating an image for a Windows 2000 Server client from the GUI started
on Windows Server 2003 or Windows XP and you select a backup created with the
old Data Protector client, the following error is displayed:
Unsupported version of drecovery.ini file. The drecovery.ini
file of your client is created with old version of Disaster
Recovery Module and is not supported by the Disaster Recovery
Module on this client. Go to the client that has the old
version of Disaster Recovery Module and create ISO image for
your client there.
Before you upgrade from Data Protector versions A.05.50 or A.06.00 without the
patch DPWIN_00270, a disaster recovery image can be created only from a GUI
started on Windows 2000 systems because the old disaster recovery is present only
on these systems. After the upgrade, the GUI on any client can be used to create
images for any client.
Disaster recovery guide 145
To Next Page
Loading...
Need help?
General