HP Data Protector A.06.11 Recovery Guide

NOTE:
Create the ASR set for the Cell Manager in advance, because you will not be able to
obtain the ASR archive file after the disaster.
Perform the following steps to create an ASR set:
1. Perform a full client backup.
2. Insert a diskette in the floppy disk drive.
3. In the HP Data Protector Manager, switch to the Restore context.
4. Click the Tasks navigation tab and select Disaster Recovery in the Scoping Pane.
5. From the drop down list in the Results Area, select the client for which you would
like to create an ASR set.
Disaster recovery guide 91

HP Data Protector A.06.11 Specifications

General

Brand	HP
Model	Data Protector A.06.11
Category	Software
Language	English