HP DL360 Maintenance And Service Guide

2
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for the
HP ProLiant DL360 Generation 3 server. After completing all necessary removal and
replacement procedures, it is recommended that server diagnostic programs be run to verify
that all components are operating correctly.
The following diagnostic programs, from the SmartStart and Support Software CD, may be
used:
•
•
•
•
•
•
•
•
•
•
System Configuration Utility
Array Diagnostic Utility (ADU)
In addition, the Server Diagnostics program may be run. This program is available at
www.hp.com/support.
Electrostatic Discharge Information
A discharge of static electricity can damage static-sensitive devices or micro circuitry. Proper
packaging and grounding techniques are necessary to prevent damage. To prevent
electrostatic damage, observe the following precautions:
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
stations.
Cover workstations with approved static-dissipating material. Use a wrist strap connected
to the work surface and properly grounded tools and equipment.
Keep the work area free of nonconductive materials such as ordinary plastic assembly
aids and foam packing.
Always be properly grounded when touching a static-sensitive component or assembly.
Avoid touching pins, leads, or circuitry.
Always place drives PCB assembly-side down.
Use conductive field service tools.
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 2-1

HP DL360 Specifications

General

Brand	HP
Model	DL360
Category	Server
Language	English