Diagnostic Tools
Option ROM Configuration for Arrays
Before installing an operating system, use the Option ROM Configuration for Arrays
(ORCA) utility to create the first logical drive, assign RAID levels, and establish online spare
configurations.
ORCA provides support for the following functions:
•
•
•
•
•
•
•
•
•
Configuring one or more logical drives using physical drives on one or more SCSI buses
Viewing the current logical drive configuration
Deleting a logical drive configuration
ORCA will default to the standard drive configuration if none is specified.
For more information about array controller configuration, refer to the Smart Array 5i Plus
Controller and Battery-Backed Write Cache Enabler User Guide, or the ROM-Based Setup
Utility User Guide on the Documentation CD.
HP ProLiant Essentials Rapid Deployment Pack
The HP ProLiant Essentials Rapid Deployment Pack software is the preferred method for
rapid, high-volume server deployments. The Rapid Deployment Pack software integrates two
powerful products: Altiris eXpress Deployment Server and the ProLiant Integration Module.
The intuitive graphical user interface of the Altiris eXpress Deployment Server console
provides simplified point-and-click and drag-and-drop solutions that enable the deployment
of target servers remotely, perform imaging or scripting functions, and maintain software
images.
For more information about the HP ProLiant Essentials Rapid Deployment Pack, refer to the
documentation that ships on the HP ProLiant Essentials Rapid Deployment Pack CD.
ROM-Based Setup Utility
The ROM-Based Setup Utility (RBSU) performs a wide range of configuration activities,
including the following:
Configuring system devices and installed options
Viewing system information
Selecting the operating system
Selecting the primary boot controller
Managing storage options
Configuring online spare memory
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 4-3
To Next Page
Loading...
Need help?
General