HP FlexFabric 5700 series Configuration Guide

47
[SwitchB-vsan1] display fc domain vsan 1
Domain Information of VSAN 1:
Running time information:
State: Stable
Switch WWN: 48:33:43:2d:46:43:1B:1B
Fabric name: 11:11:11:11:11:11:11:11
Priority: 128
Domain ID: 2
Configuration information:
Domain configure: Disabled
Domain auto-reconfigure: Disabled
Fabric name: 11:11:11:11:11:11:11:11
Priority: 128
Domain ID: 2 (static)
Principal switch running time information:
Priority: 128
No interfaces available.
The output shows that:
{ The domain configuration was complete.
{ The runtime domain ID of Switch B is 2.
Dynamic fabric building configuration example
Network requirements
As shown in Figure 19, use the dynamic method to build a fabric.
Figure 19 Network diagram
Configuration procedure
This section describes only fabric building configurations.
1. Configure Switch A:
# Configure the switch to operate in advanced mode. (Skip this step if the switch is operating in
advanced mode.)
<SwitchA> system-view
[SwitchA] system-working-mode AdvancedBridge

HP FlexFabric 5700 series Specifications

General

Brand	HP
Model	FlexFabric 5700 series
Category	Switch
Language	English