HP FlexFabric 5700 series Configuration Guide

87
Copying zone aliases, zones, and zone sets
You can create a zone alias, zone, or zone set by copying an existing one. The source and the
destination have the same contents but different names.
To copy a zone alias, zone, and zone set:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSAN view.
vsan vsan-id N/A
3. Copy an existing zone
alias to create a new zone
alias.
zone-alias clone src-name dest-name
The source zone alias must have
been created, and the destination
zone alias must not have been
created.
4. Copy an existing zone to
create a new zone.
zone clone src-name dest-name
The source zone must have been
created, and the destination zone
must not have been created.
5. Copy an existing zone set
to create a new zone set.
zoneset clone src-name dest-name
The source zone set must have
been created, and the destination
zone set must not have been
created.
Deleting the zone database
You can delete the zone database for a VSAN, including all zone sets, zones, and zone aliases, but not
the active zone set.
To delete the zone database:
Ste
p
Command
1. Enter system view.
system-view
2. Enter VSAN view.
vsan vsan-id
3. Delete the zone database.
delete zone database all
Enabling SNMP notifications
After you enable SNMP notifications for the zone module, the zone module generates notifications for
important events and sends the notifications to the SNMP module. For more information about SNMP
notifications, see Network Management and Monitoring Configuration Guide.
To enable SNMP notifications:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A

HP FlexFabric 5700 series Specifications

General

Brand	HP
Model	FlexFabric 5700 series
Category	Switch
Language	English