2-2
Installing the Switch
Installation Procedures
■ Power cord, one of the following
Japan Power
Cord Warning
Installation Procedures
Summary
1. Prepare the installation site (page 2-5). Ensure the physical environ-
ment is properly prepared, including having the correct network cabling
ready to connect to the switch and having an appropriate location for the
switch. See page 2-4 for some installation precautions.
Note For steps 2 and 3 below, if an E3800 switch is powered on for the first time
without a stacking module installed, stacking will be disabled and that will be
saved in the switch's running configuration. For more information, see
“Stacking Information and Topologies” on page 2-23.
2. Verify the switch passes self test (page 2-6). Plug the switch into a
power source and observe that the LEDs on the switch’s front panel
indicate correct switch operation. When self test is complete, unplug the
switch.
Region All 3800 Switches
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
South Africa and India
Argentina
Brazil
Thailand
Chile
Taiwan
Israel
India
8121-0857
8120-1034
8120-5336
8120-5340
8120-5342
8120-5339
8120-5334
8121-0973
8120-5341
8120-8375
8121-1132
8121-0671
8120-8389
8121-0967
8121-1009
8120-5341
To Next Page
Loading...
Need help?
General
