To Next Page

To Previous Page

1-1

Introducing the E3800 Switches

The HP E3800 switches are multiport switches that can be used to build high-

performance switched networks. These switches are store-and-forward

devices offering low latency for high-speed networking. The E3800 switches

also support a field-replaceable Redundant Power Supply and fan tray, Power

over Ethernet (PoE/PoE+) technologies, and full network management

capabilities.

In addition, the E3800 switches support the HP FlexChassis Mesh feature

for stacking the switches. When E3800 Stacking Modules (J9577A) are

installed in the switches, any combination of up to ten E3800 switches can be

stacked together via high-speed backplane cables to form a single extended

virtual switch. See “Stacking Information and Topologies” on page 2-23, and

the E3800 Advanced Traffic Management Guide for more stacking

information.

These switches are described in this manual:

This chapter describes these switches with the following information:

■ Fronts of the switches:

• Network Ports

• Management Ports

• LEDs

• Buttons

■ Backs of the switches:

• Power Supplies and Power Connectors

• Fan Tray

■ HP E3800 Stacking Module

■ Switch Features

Non-PoE Switches PoE+ Switches

HP E3800-24G-2SFP+ Switch (J9575A) HP E3800-24G-PoE+-2SFP+ Switch (J9573A)

HP E3800-48G-4SFP+ Switch (J9576A) HP E3800-48G-PoE+-4SFP+ Switch (J9574A)

HP E3800-24SFP-2SFP+ Switch (J9584A) HP E3800-24G-PoE+-2XG Switch (J9587A)

HP E3800-24G-2XG Switch (J9585A) HP E3800-48G-PoE+-4XG Switch (J9588A)

HP E3800-48G-4XG Switch (J9586A)

HP J9574A Installation And Getting Started Guide

Other manuals for HP J9574A