HP JG221A User Manual

To do… Use the command… Remarks
Configure the format of the time
stamp
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Outputting system information to the SNMP module
NOTE:
The SNMP module accepts only the trap information; it discards lo
g
and debu
gg
in
g
information even if
you have configured to output them to the SNMP module.
To monitor the running status of the device, trap information is usually sent to the SNMP network
management system (NMS). To do so, you need to configure to send traps to the SNMP module, and
then set the trap sending parameters for the SNMP module to further process traps. For more information,
see the chapter “SNMP configuration.”
Follow these steps to configure to output system information to the SNMP module:
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
See Table 5 for default channel
names.
Configure the channel through
which system information can be
output to the SNMP module
info-center snmp channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the SNMP module
through channel 5 (snmpagent).
Configure the output rules of the
system information
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional
See “Default output rules of system
information.”
Configure the format of the time
stamp
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Outputting system information to the web interface
This feature allows you to control whether to output system information to the web interface and which
system information can be output to the web interface. The web interface provides abundant search and
sorting functions. If you configure to output the system information to the web interface, view system
information by clicking corresponding tabs after logging in to the device through the web interface.
164

HP JG221A Specifications

General

Brand	HP
Model	JG221A
Category	Switch
Language	English