HP JG221A User Manual

3.
The NQA client computes the network performance and service quality parameters, such as the
packet loss rate and round-trip time based on the received responses.
NQA configuration task list
Complete the following task to enable the NQA server:
Task Remarks
Configuring the NQA server Required for TCP, UDP echo, UDP jitter, and voice tests
To perform NQA tests successfully, perform the following configurations on the NQA client:
1. Enable the NQA client.
2. Create a test group and configure test parameters. The test parameters may vary with test types.
3. Schedule the NQA test group.
Complete these tasks to configure NQA client:
Task Remarks
Enabling the NQA client Required
Creating an NQA test group Required
Configuring ICMP echo tests
Configuring DHCP tests
Configuring DNS tests
Configuring FTP tests
Configuring HTTP tests
Configuring UDP jitter tests
Configuring SNMP tests
Configuring TCP tests
Configuring UDP echo tests
Configuring voice tests
Configuring an NQA test group
Configuring DLSw tests
Required
Use any of the approaches.
Configuring threshold monitoring Optional
Configuring the NQA statistics collection function Optional
Configuring the history records saving function Optional
Configuring optional parameters for an NQA test group Optional
Scheduling an NQA test group Required
Configuring the NQA server
To perform TCP, UDP echo, UDP jitter, or voice tests, configure the NQA server on the peer device. The
NQA server responds to the probe packets sent from the NQA client by listening to the specified
destination address and port number.
11

HP JG221A Specifications

General

Brand	HP
Model	JG221A
Category	Switch
Language	English