HP JG221A User Manual

Follow these steps to configure the NQA server:
To do… Use the command… Remarks
Enter system view system-view —
Enable the NQA server nqa server enable
Required
Disabled by default.
Configure the listening service
nqa server { tcp-connect |
udp-echo } ip-address
port-number
Required
The destination IP address and port
number must be the same as those
configured on the NQA client. A
listening service must be unique on
the NQA server.
Enabling the NQA client
Configurations on the NQA client take effect only when the NQA client is enabled.
Follow these steps to enable the NQA client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the NQA client nqa agent enable
Optional
Enabled by default.
Creating an NQA test group
Create an NQA test group before you configure NQA tests.
Follow theses steps to create an NQA test group:
To do… Use the command… Remarks
Enter system view system-view —
Create an NQA test group, and
enter the NQA test group view
nqa entry admin-name
operation-tag
Required
In the NQA test group view, you
can specify the test type
You can use the nqa entry
command to enter the test type
view of an NQA test group with
test type configured.
Configuring an NQA test group
Configuring ICMP echo tests
ICMP echo tests of an NQA test group are used to test reachability of a destination host according to the
ICMP echo response information. An ICMP echo test has the same function as the ping command but
12

HP JG221A Specifications

General

Brand	HP
Model	JG221A
Category	Switch
Language	English