Configuring the Switch Modules using the Menu-driven Interface
Updating User Account Information
To update a user password or privilege level:
1. Highlight User Accounts Management on the main menu.
2. Press the Enter key. The Setup User Accounts screen is displayed.
3. Toggle the Action field to Update.
4. Type the user name for the account you want to change in the Username field.
5. If the password is to be changed, type the new password in the New Password field.
6. Type the new password again in the Confirm New Password field.
7. If the privilege level is to be changed, toggle the Access Level field until the appropriate
level is displayed—Root, User+, or User.
8. Highlight APPLY.
9. Press the Enter key to make the change effective.
IMPORTANT: To save the configuration settings permanently, you must enter them into NVRAM
using the Save Changes option on the main menu. Refer to the “Saving Changes” section for
more information.
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide 2-5
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
To Next Page
Loading...
Need help?
General