Configuring the Switch Modules using the Menu-driven Interface
2. Press the Enter key. The following screen is displayed.
The Switch Utilities menu displays the server IP address and the switch module IP address,
subnet mask, and gateway router addresses. The bottom of the screen provides a menu for
using TFTP services and a performing a ping test.
Upgrading Firmware from a TFTP Server
To upgrade the firmware from a TFTP server:
1. Highlight Upgrade Firmware from TFTP Server on the Switch Utilities menu.
2. Press the Enter key. The following screen is displayed.
3. Type the IP address of the TFTP server in the Server IP Address field.
IMPORTANT: The TFTP server must be on the same IP subnet as the switch module.
4. Type the port number of the TFTP server you wish to connect to in the Server TFTP
Port Number field.
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide 2-59
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
To Next Page
Loading...
Need help?
General