HP ProLiant DL585 Maintenance And Service Guide

Removal and Replacement Procedures
Memory Options
Minimum Memory Requirements
•
•
•
•
•
•
Two DIMMs must be installed in bank 1 on the processor memory board in slot two.
All DIMMs on a processor memory board must have the same part number.
NOTE: Processor memory boards in slots 1, 3, and 4 may be installed without memory. Certain
application programs run more efficiently if the DIMMs are balanced across all processor memory
boards.
Memory Population Guidelines
Supported configurations:
DIMMs on different processor memory boards can be of different sizes.
DIMMs on the same processor memory board must be of the same size and have the
same part number.
DIMMs must be installed on a processor memory board in pairs and in bank order.
DIMMs must populate three or fewer banks on a memory board with PC2700 DIMMs to
maintain a memory clock speed of 333 MHz.
NOTE: If all four banks (eight DIMM slots) are populated with PC2700 DIMMs, the maximum memory
clock speed will be 266 MHz.
Figure 2-13: DIMM slots
2-16 HP ProLiant DL585 Server Maintenance and Service Guide

HP ProLiant DL585 Specifications

General

Brand	HP
Model	ProLiant DL585
Category	Server
Language	English