Installing Novell NetWare 5.1
f. Scroll down and select Return to driver summary.
g. Scroll down and keep Continue highlighted.
h. Press Enter to continue.
3. The installation program displays the partitioning properties. HP recommends keeping
the default value by selecting Continue.
4. Wait as the system performs the installation according to your settings.
Phase 3 - Configuring the Network
The installation proceeds under a graphical interface.
NOTE: Some settings can be defined by using the tree icon at the right side of the field. The network
settings need to be customized to your environment. Refer to the Novell NetWare manuals should you
need further details on the networking setup fields.
1. Follow the on-screen instructions to configure your network: server name, IP address,
Host name and domain, etc.
2. Insert and browse the NetWare 5.1 licensing/cryptographic diskette when prompted.
3. When prompted, click Yes to reboot the server (remember to remove all diskettes and
CD-ROMs from their respective drives).
The system will load the NetWare GUI.
NOTE: It is possible that during the initial reboot of the NetWare 5.1 OS, the GUI mode may not load
properly. This can be resolved by installing NW5.1 Support Pack 3 or above. Refer to the instructions
on the next section.
Section 3. Installing the NetWare 5.1 Support Pack
1. Get the latest copy of NetWare Consolidated Support Pack (CSP) from NetWare’s
website at
http://support.novell.com/tools/csp/.
You can either subscribe to the Novell Support Connection CD program or download
CSP files individually. You will need to mount the Novell Consolidated Support Pack as
a NetWare volume.
HP recommends you use NetWare 5.1 Support Pack 3 or above.
2. Close the GUI.
3. Press Ctrl + Esc.
A selection screen will be displayed.
4. Select system console.
5. Insert the NetWare 5.1 Support Pack CD-ROM.
6. At the system console prompt enter the command:
load cdrom
3-4 HP ProLiant ML110 Server Network Operating System Installation Guide
To Next Page
Loading...
Need help?
General