HP ProLiant ML110 Operating System Installation Guide

1
Preparatory Procedures for NOS Installation
NOS Installation Highlights
This section is for expert users who are familiar with the standard installation process of
their NOS. HP recommends taking into account the following specific information in order
to adapt your usual NOS installation to the particularities of your HP ProLiant ML110
server.
Listed below are the HP drivers required for specific NOSs. These drivers are provided on the
HP ProLiant ML110 Server Startup CD-ROM.
Chipset driver
LAN driver
SCSI driver
Microsoft
®
Windows
®
Server 2003 and Windows
Small Business Server 2003
HP drivers
RAID driver
LAN driver Novell
®
NetWare
®
5.1 HP drivers
SCSI driver
LAN driver Novell NetWare 6.0 and Small Business Suite HP drivers
SCSI driver
Novell NetWare 6.5 HP drivers None
Red Hat
®
Linux
®
9.0 HP drivers None
Red Hat Enterprise Linux ES 2.1 HP drivers None
NOTE: The HP ProLiant ML110 Server Startup CD-ROM is not bootable.
The detailed instructions relative to each specific step (location of drivers, workarounds) are
provided in the respective NOS chapters (Chapters 2 to 7).
HP ProLiant ML110 Server Network Operating System Installation Guide 1-1

HP ProLiant ML110 Specifications

General

Brand	HP
Model	ProLiant ML110
Category	Server
Language	English