HP ProLiant ML110 Operating System Installation Guide

7
Installing Red Hat Enterprise Linux ES 2.1
Red Hat Enterprise Linux ES 2.1 Pre-installation Instructions
1. Complete the pre-NOS installation procedures listed in Chapter 1.
2. Have the following installation requirements on hand:
•
•
•
•
HP ProLiant ML110 Server Startup CD-ROM
Red Hat Enterprise Linux ES 2.1CD-ROMs (2 discs)
A Windows PC that has a:
— Floppy drive
— CD-ROM drive
— Browser that supports HTML
This requirement is for when you need to create driver diskettes from the Startup CD.
Two or more clients for testing purpose (optional)
Red Hat Enterprise Linux ES 2.1 Installation Flow
1. Install Red Hat Enterprise Linux ES 2.1.
2. Install additional HP accessories.
Section 1. Installing Red Hat Enterprise Linux ES 2.1
Phase 1 - Launching the Red Hat Enterprise Linux ES 2.1 Installer
1. Turn on the server and insert the Red Hat Enterprise Linux ES 2.1 CD 1.
The system will display a text menu.
If you are using the Promise FastTrak TX4000 IDE RAID controller, refer to the
readme.txt file in the Promise FastTrak TX4000 driver disc for instructions.
If you do not have a driver disc, proceed to step 2.
HP ProLiant ML110 Server Network Operating System Installation Guide 7-1

HP ProLiant ML110 Specifications

General

Brand	HP
Model	ProLiant ML110
Category	Server
Language	English