Installing Novell NetWare 6.0 and Novell Small Business Suite
4-8 HP ProLiant ML110 Server Network Operating System Installation Guide
•
5. Select the proper path containing the INSTALL.ips file.
6. Press F10 to accept the selection and initialize file copying.
7. Go to NCF File Options and select Edit Startup.ncf File, then press Enter.
8. Modify the startup.ncf file by entering the command lines below:
; LOAD MPS14.PSM
LOAD ACPIDRV.PSM
9. Save the changes you made.
10. Reboot the system.
Method 2
1. Insert the HP disk PSM4B patch diskette you created earlier in the floppy drive.
2. Locate the folder appropriate for the system, ACPIDRV\5.x or CPIDRV\6.x, and copy
its contents to the startup directory (C:\NWSERVER).
3. Reboot the system.
Section 5. Installing Additional HP Accessories
The HP ProLiant ML110 Server Startup CD-ROM includes the drivers for accessories
compatible to your server.
Refer to the product manual enclosed with the accessory for the detailed installation
procedure and/or to the attached readme.txt file associated with the driver. The readme.txt file
can be found on the appropriate driver diskette.
Troubleshooting
This section will help you resolve some of the most common installation problems associated
with Novell NetWare 6.0.
How do I restart the NetWare installation?
If you want to restart NetWare installation from the very beginning, use a utility such as fdisk
to erase all data and partitions from your hard drive. You can then resume the installation
process.
On-line Information and Software Sources
HP World Wide Web access: www.hp.com
• Novell World Wide Web access: www.novell.com
• Novell Networking BBS: 801-429-3308 (9,600 baud)
To Next Page
Loading...
Need help?
General