226 Fabric OS Administrator’s Guide
53-1002745-02
Policy database distribution
7
Use the chassisDistribute command to distribute IP filter policies. To distribute other security
policies, use the distribute command.
Displaying the database distribution settings
1. Connect to the switch and log in using an account with admin permissions, or an account with
OM permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg
--showall command.
Example shows the database distribution settings
switch:admin> fddcfg --showall
Local Switch Configuration for all Databases:-
DATABASE - Accept/Reject
---------------------------------
SCC - accept
DCC - accept
PWD - accept
FCS - accept
AUTH - accept
IPFILTER - accept
Fabric Wide Consistency Policy:- ""
Enabling local switch protection
1. Connect to the switch and log in using an account with admin permissions, or an account with
OM permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg
--localreject command.
Disabling local switch protection
1. Connect to the switch and log in using an account with admin permissions, or an account with
OM permissions for the FabricDistribution RBAC class of commands.
2. Enter the fddCfg
--localaccept command.
FCS policy database FCS
IP Filter policy database IPFILTER
Password database PWD
SCC policy database SCC
TABLE 41 Supported policy databases (Continued)
Database type Database identifier (ID)
To Next Page
Loading...
Need help?
General