3 Power Modules
About This Chapter
NOTICE
l All power modules are hot swappable, but it is highly recommended that you power off a
switch before removing or installing a power module in the switch to protect personal and
equipment safety.
l Before replacing a power module in a switch, make sure that the switch can be powered by
the other power module after the power module is removed. Otherwise, services on the
switches will be interrupted by a power failure when the power module is removed.
l Before powering off a switch, shut down all of its power supply units.
l The S6720-EI can use 350 W DC and 600 W AC power modules together. Other models do
not allow power modules of different power values to be used in the same chassis.
3.1 350 W DC power module
3.2 500 W DC Power Module
3.3 600 W AC Power Module
3.4 500 W AC Power Module
S6700 Series Ethernet Switches
Hardware Description
3 Power Modules
Issue 12 (2015-07-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
42
To Next Page
Loading...
Need help?
General
