Figure 7-6 Clearing alarms
Switch to the owner account with PV plant management rights. On the home
page, click the PV plant name to go to the PV plant page, and click OK as
prompted to clear the alarm.
7.3.4 DRM (Australia AS 4777)
Function
According to Australia AS 4777.2-2015, inverters need to support the function of
demand response modes (DRM), and DRM0 is a mandatory requirement.
This function is disabled by default.
Figure 7-7 Wiring diagram for the DRM function
SUN2000-(8K, 10K)-LC0 Series
User Manual 7 Power-On and Commissioning
Issue 01 (2023-09-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 86
To Next Page
Loading...
Need help?
General